top of page

Product: AMPLIFON SET 140

Serial Number: **

Cosmetic Description: 9/10 The product is 100% perfect condition as new. It was not repaired, it has no scratch, no defect. 

What is Included: without original packaging, without manual. For transport, a special wooden box and anti-shock pads will be ordered

Functional Notes: Operational condition of this item is excellent, fully tested and no issues found.

Age: /

# of Owners: 2

Tobacco Exposure: No

Service History: None

 

The input stage is based on a EC86 triode with a high degree of linearity, an output triode is driven by a 6C41C, and all voltages are stabilized (the anode voltages of the input tubes, the driver , the output stage, the filament heaters of the input stage, as well as the heaters of the driver and output stages).

AMPLIFON SET 140

8 400,00£Prix
  • Made in Poland, the AMPLIFON Set 140 monoblock amplifiers.

    The input stage is based on a EC86 triode with a high degree of linearity.
    The output triode is driven by a 6C41C.
    All voltages are stabilized (anode voltages of the input tubes, the driver tube, the output stage, the filament heaters of the input stage, as well as the heaters of the driver and output stages).
    The device is equipped with a soft start mechanism and an autobias. It does not require from the user any whatsoever “regulation” or “trimming” activities during the normal course of usage.
    Special security means are built in, so as to detect and accordingly react to too high a current of the output tube, and/or too high a temperature within the device.
    The amplifier also signals the end of life condition of the power output tube, where the working current of the output tube is below an acceptable threshold level.

    The specs: 
    Output Power ………………………….140W
    Frequency range ………………...........06 Hz – 41 kHz (1W -3dB)
    Frequency range ………………...........23 Hz – 37 kHz (130W -3dB)
    Distortion ………………………………..< 0,2% 10W 1kHz
    Output Noise Level .....................……..< 0,5 mV
    Input Sensitivity ........…………………..1,6V RMS
    Input Impedance .............……………...120 Kohm
    Speaker Output Taps ............………... 4 ohm, 8 ohm
    Power consumption …………………..500W
    Dimensions (W*H*D) ...............:…….. .310 * 410 * 690 mm
    Weight pcs ……………………………. ~70 kg
    Inputs……………………………………RCA WBT
    Output posts ........……………………..WBT gold plated copper, accepts bananna plugs and spades.
    Interstage Capacitors .......……………VCap CuTf or: Duelund Cast PioCu
    Resistors in audio path ........…………Shinkoh Audio Note

bottom of page